Naturactis, Active By Nature
Ideal dental implant for post-extraction surgery
Diameter: 3 to 5 mm
Length: 6 to 18 mm
Diameter: 3 to 5 mm
Length: 6 to 18 mm
The Self-Guiding Implant
The Naturactis dental implant can be used in a wide range of indications, particularly for post-extraction surgery, for immediate loading or for sites with low bone density.
This implant is designed for the treatment of partial or complete edentulism in both the maxilla and mandible. It will be placed in a subcrestal position to provide the best possible aesthetic restoration with appropriate management of the biological space and healing.
This implant is designed for the treatment of partial or complete edentulism in both the maxilla and mandible. It will be placed in a subcrestal position to provide the best possible aesthetic restoration with appropriate management of the biological space and healing.
Net Designed For Excellent Primary Stability
LYRA ETK has developed an implant architecture that provides excellent primary stability for its range of implants.
Asymmetrical Double Net
Even distribution of masticatory forces
Excellent primary stability as soon as the implant is inserted
Reduces bone heating and insertion time
Excellent primary stability as soon as the implant is inserted
Reduces bone heating and insertion time
Microthread synchronised with the main thread
Insertion without tearing the cortical bone
Enhanced stabilization of the cortical bone
Optimisation of primary anchorage.
Greater resistance to axial loads
A reduction in shear stress at the bone/implant interface.
Central protrusion between the fillets
Increases the contact surface with bone tissue by 15%.
Facilitates osteogenesis
Activates cellular reconstruction
Apex with Deep Blades
Great self-tapping quality.
It is ideal for extraction-implantation situations.
It gives greater control over the desired insertion axis.
It provides optimal bone anchorage.
A Single, Shared Connection with Dental Implants From the Bone Level Range
Naturactis, Naturall+ and iBone dental implants have the same connection. This means that the prosthetic parts you need for Naturall+ and iBone dental
implants are the same as those you need for Naturactis, and vice versa. This means you can optimise your stock of prosthetic parts.
A High-Performance Connection
Bone Level dental implants have an internal hexagonal tapered connection to guarantee :
Prosthetic joint sealing
The stability of the implant/prosthetic part assembly
Precise orientation of the prosthetic components
The stability of the implant/prosthetic part assembly
Precise orientation of the prosthetic components
A Unique Connection
The unique connection, common to all our Bone Level implants and for all diameters, allows :
Rationalisation of the stock of prosthetic parts Simplification of exchanges between the laboratory, the implantologist and his correspondents
The choice of gingival platform does not depend on the choice of implant diameter.
Rationalisation of the stock of prosthetic parts Simplification of exchanges between the laboratory, the implantologist and his correspondents
The choice of gingival platform does not depend on the choice of implant diameter.
Proven Stae® Surface Finish
Microsanding with titanium oxide
Nitric and hydrofluoric acid etching.
30 years of clinical hindsight.
Direct drive from implant to mandrel
Saves time during surgery
Better visibility of insertion level and connection orientation
Your Surgical Accessories For Bone Level Dental Implants
Surgical kit
This kit contains all the instruments needed to carry out the surgical protocol and manage all bone densities for all lengths and diameters of Naturall+ and Naturactis implants.
Stop kit
Universal kit: can be used with all implant ranges (step drills only).
Direct drive of the stops to the counter-angle Colour coding for easy identification of the stops according to the diameter of the drill bit used
28 stops for short and long drills included in the kit Kit can be sterilized in an autoclave
Direct drive of the stops to the counter-angle Colour coding for easy identification of the stops according to the diameter of the drill bit used
28 stops for short and long drills included in the kit Kit can be sterilized in an autoclave
Extraction kit
This extraction kit can be used to remove abutments stuck in the implant, broken screws, and the implant itself. Our extraction kits are available for all our implant ranges.
Think About it! Naturactis is also Available in Ø3MM.
Naturactis is also available in Ø3mm.
Ideal for narrow ridges or in areas of high anatomical stress.
It has all the advantages of Naturactis.
Its connection is shared with Ø3 implants.
Streamline your instruments with a common kit for all our narrow implants.
Ideal for narrow ridges or in areas of high anatomical stress.
It has all the advantages of Naturactis.
Its connection is shared with Ø3 implants.
Streamline your instruments with a common kit for all our narrow implants.
Our Reliable and Proven Manufacturing Processes
Certified surface finish
30 years of clinical experience Microsandblasting with titanium oxide. Etched with nitric and hydrofluoric acids.
Precise, watertight, validated connection
15 years of clinical experience Internal hexagonal tapered connection. A single prosthetic connection common to all implant diameters.
Our quality guarantees
100% French implants Implants guaranteed for life Prosthetic part guaranteed for 10 years CE and ISO 12485 standard
The media library
All the information about our products is available 24/7 in the media library.
